Last night when I got home, I called the Honda service center and told them the problem with the key fob. I asked if there was anything I could do to program it, but the girl I talked to said I'd probably have to take the car back in to get it programmed. (Hence the frustration)
Well, I called again today to talk to the guy I dealt with both times I was in there. He was busy, so I left a message for him to call me back. He hasn't called, and I got tired of waiting, so I looked up the User Manual for the car. I searched 'remote transmitter' and found that I could either take the transmitter to the dealer for programing, or I could program it myself. I followed the instructions, and it worked!! The fob works now, and I don't have to find time to go back!!
Yes, I'm happy.
The instructions were really easy -
Programming remote transmittersThese instructions are for a 2001 Ford Taurus. Please check your Users' Manual for instructions for your own car.
It is necessary to have all (maximum of four — original and/or new) of your remote transmitters available prior to beginning this procedure.
To program the transmitters yourself:
- Place the key in the ignition and turn from 2 (LOCK) to 3 (OFF) and cycle between 3 (OFF) and 4(ON) eight times in rapid succession (within 10 seconds) with the eighth turn ending in the 4 (ON) position. The doors will lock/unlock to confirm that programming mode has been entered.
- Within 20 seconds, program a remote transmitter by pressing any button on a transmitter. The doors will lock/unlock to confirm that the remote transmitter has been programmed. (If more than 20 seconds pass before pressing a remote transmitter button, the programming mode will exit and the procedure will have to be repeated.)
- Repeat the previous step to program additional remote transmitters. The doors will lock/unlock to confirm that each remote transmitter has been programmed.
- When you have completed programming the remote transmitters, turn the ignition to 3 (OFF) or wait 20 seconds. Again the doors will lock/unlock to confirm programming has been completed.
No comments:
Post a Comment
I love your comments! Keep them coming.